Ультранизкотемпературный тонер - Страница 2 - Цифровая печать как бизнес - форум и портал
Индустрия цифровой печати - отраслевой портал  

Вернуться   Цифровая печать как бизнес - форум и портал > Технический раздел - ремонт принтеров, копиров > XEROX

Реклама на форуме
  • Дополнительный доход для сервисного инженера. Узнать как…
Ответ
 
Опции темы
Старый 14.01.2009, 08:42   #1
KudesNIK
Местный
 
Аватар для KudesNIK
 
Регистрация: 22.06.2008
Адрес: Moscow
Сообщений: 3,142
Репутация: 947
Отправить сообщение для KudesNIK с помощью ICQ Отправить сообщение для KudesNIK с помощью Skype™
По умолчанию Ультранизкотемпературный тонер

Вот какую статейку надыбал:

Xerox Prepares For New Era
According to Xerox its new toner plant will soon be ready to meet growing demand for its digital printing systems, which in turn will require the installation of 6, 113,750 litre (25,000 gallon) tanks to contain its EA toner. The arrival of the tanks will herald an era of more energy efficient digital printing, preparing for the production of Ultra Low-Melt EA Toner, a breakthrough product, which the company claims can cut overall power consumption of digital printing devices by as much as 15 to 30%.
Fusing the toner or sealing it on the page is the most power-intensive process in printers and multifunction devices, accounting for 50 to 80% of the total power used. In developing the Ultra Low-Melt EA Toner, scientists at Xerox Research Centre of Canada (XRCC) aimed to save energy by lowering the fusing temperature. The new toner melts at 7.2 degrees Celsius (45 degrees Fahrenheit), a lower temperature than the EA toner now being used in current Xerox products, without compromising image quality or performance.
"This was the most difficult toner design we ever worked on," said Hadi Mahabadi, Xerox vice president and manager of XRCC. "We had to push the envelope to the limit to achieve lower melting temperature and higher gloss while keeping other performance the same as or better than current EA toner."
Scientists at XRCC initially developed the EA process at Xerox and the Ultra Low-Melt EA Toner is their next generation product. Emulsion aggregation (EA) technology is a nanotechnology-based process that yields sharper image quality, higher reliability and reduced toner usage in an energy efficient manufacturing process. In fact, pages printed with EA toner use 40 to 50% less material than those printed with older style toners. Until five years ago, all Xerox toner was made by grinding plastic pellets into very fine particles – an energy intensive mechanical process.
Scientists and engineers at Xerox, in collaboration with colleagues at Xerox' partner company Fuji Xerox designed and tested many polymers before discovering polyesters that could be combined with other toner ingredients such as coloured pigments and wax particles to form the Ultra Low-Melt EA Toner. Xerox scientists have applied for more than 35 patents related to discoveries they made while developing the new toner with 10 patents already being granted.
"With the new tanks, we expect the Webster plant to start producing the Ultra Low Melt EA Toner sometime next year," said Edouard Langlois, project manager for the Xerox Consumables, Development and Manufacturing Group. "Installation of these tanks will give this plant the flexibility to meet the demand for both first and second generation EA toners and will help Xerox deliver the most energy-efficient document management solutions for its customers."
Since EA toner was first introduced, Xerox and Fuji Xerox have designed more than 50 office and production products that use EA toner. The new low-melt toner will be suitable for all future products, from desk top printers to high-end office multifunction devices to high-speed commercial colour presses. The Xerox 700 Digital Colour Press, which was unveiled in May, is the first product to use the new toner, which is currently being produced in Japan.


Более всего тут интересно - что же это за тонер такой, который плавится при 7.2 градусах цельсия? Насколько он после этого устойчив на отпечатке? Что за технология может применяться для его нанесения на бумагу? ЕА тонеры уже сейчас у Ксерокса существуют - это ведь обычные тонеры, вроде бы? Кто-нибудь слышал что-нибудь об этой технологии?
__________________
С уважением,
Сергей Лебедев (AKA KudesNIK)
KudesNIK вне форума   Ответить с цитированием
Старый 19.01.2009, 02:58   #21
asahi
Пользователь
 
Регистрация: 06.08.2008
Сообщений: 60
Репутация: 8
По умолчанию

Что то в переводе пропустили.
Новьи тонер плавится на температура 7.2 градуса ниже чем обьичньи ЕА тонер.
А у 700DCP печка как печка.
asahi вне форума   Ответить с цитированием
Старый 19.01.2009, 08:49   #22
KudesNIK
Местный
 
Аватар для KudesNIK
 
Регистрация: 22.06.2008
Адрес: Moscow
Сообщений: 3,142
Репутация: 947
Отправить сообщение для KudesNIK с помощью ICQ Отправить сообщение для KudesNIK с помощью Skype™
По умолчанию

asahi, где здесь пропущено "на": The new toner melts at 7.2 degrees Celsius (45 degrees Fahrenheit), a lower temperature than the EA toner now being used in current Xerox products, without compromising image quality or performance.
Специально жирным шрифтом выделил значимую частицу...
Кстати, если убрать цифры, то действительно получится, что плавится при более низкой температуре, чем сегодняшний. Но цифры всё меняют в этом предложении. И делают его довольно забавным.
__________________
С уважением,
Сергей Лебедев (AKA KudesNIK)

Последний раз редактировалось KudesNIK; 19.01.2009 в 08:51..
KudesNIK вне форума   Ответить с цитированием
Старый 19.01.2009, 10:38   #23
Роман Першин
Модератор
 
Аватар для Роман Першин
 
Регистрация: 03.08.2008
Адрес: Тамбов
Сообщений: 4,598
Репутация: 773
Отправить сообщение для Роман Першин с помощью ICQ
По умолчанию

KudesNIK, я чет на слово поверил, не стал статью вдумчиво читать, а ведь и правда написано, что плавится при температуре 7.2 градуса ниже, чем обычный ЕА тонер, и предлог "на" там и не нужен, скорее ", а" в этом тексте лишние, если убрать, то все на свои места становится.
Роман Першин вне форума   Ответить с цитированием
Старый 19.01.2009, 10:52   #24
KudesNIK
Местный
 
Аватар для KudesNIK
 
Регистрация: 22.06.2008
Адрес: Moscow
Сообщений: 3,142
Репутация: 947
Отправить сообщение для KudesNIK с помощью ICQ Отправить сообщение для KudesNIK с помощью Skype™
По умолчанию

Но согласись, что так, как написано - довольно забавно выходит...
__________________
С уважением,
Сергей Лебедев (AKA KudesNIK)
KudesNIK вне форума   Ответить с цитированием
Старый 19.01.2009, 11:24   #25
asahi
Пользователь
 
Регистрация: 06.08.2008
Сообщений: 60
Репутация: 8
По умолчанию

Забавно вьиходит - да, но все таки не правда.
asahi вне форума   Ответить с цитированием
Старый 19.01.2009, 13:35   #26
Som
Местный
 
Регистрация: 12.08.2008
Адрес: Ar
Сообщений: 1,933
Репутация: 240
По умолчанию

Температура плавления ниже обычного ЕА тонера на 7,2 градусов это скорее всего и есть правильная информация....
Som вне форума   Ответить с цитированием
Старый 19.01.2009, 17:43   #27
KudesNIK
Местный
 
Аватар для KudesNIK
 
Регистрация: 22.06.2008
Адрес: Moscow
Сообщений: 3,142
Репутация: 947
Отправить сообщение для KudesNIK с помощью ICQ Отправить сообщение для KudesNIK с помощью Skype™
По умолчанию

А жаль... так забавно всё выглядело на первый взгляд...
__________________
С уважением,
Сергей Лебедев (AKA KudesNIK)
KudesNIK вне форума   Ответить с цитированием
Ответ

Опции темы

Быстрый переход

183 204 195 210 237 243 263 7 8 152 15 16 13 11 10 14 35 9 256 123 37 144 145 146 179 20 258 21 22 124 23 24 97 127 128 25 26 126 136 154 64 65 254 233 159 162 163 164 66 27 98 48 56 120 58 59 60 61 62 135 63 165 166 200 201 202 51 53 167 169 168 172 52 55 54 125 255 207 217 218 219 220 221 222 223 224


"Форум индустрии цифровой печати" 2008-2023

Все вопросы по сотрудничеству:

Электропочта: info@trade-print.ru

Москва, Печатников пер.

Текущее время: 22:57. Часовой пояс GMT +4.

Яндекс.Метрика