|
|
Регистрация | Пригласить друга | Все альбомы | Файловый архив | Справка | Сообщество | Календарь | Сообщения за день | Поиск |
|
Опции темы |
18.01.2023, 14:36 | #1 |
Пользователь
Регистрация: 17.11.2009
Адрес: МАсква
Сообщений: 72
Репутация: 1
|
Как проверить моторчик драма DC250
Подскажите как проверить моторчик драма ? Нашел такое chain-link 042-011 В сервисном меню где рыть, что бы эту цепь проверить ? |
19.01.2023, 13:51 | #2 |
Местный
Регистрация: 24.09.2008
Адрес: Нижневартовск
Сообщений: 181
Репутация: 12
|
Re: Как проверить моторчик драма DC250
Если не пользовались сервисным меню.
Лучше для этой цели пригласить опытного мастера. Enter UI Diagnostic mode (see Accessing UI Diagnostics). From the IO Check menu, select Component Control. The following are displayed: Chain - Link dialog boxes (Refer to the appropriate table for the Chain-Link (code) number) Table 1 Inputs for IOT and A/P Finisher Table 2 Outputs for IOT and A/P Finisher Table 3 Light Production Finisher Inputs (DocuColor 242/252/260 only) Table 4 Light Production Finisher Outputs (DocuColor 242/252/260 only) Enter Number button Show Current Status button Cyclic Motion check box Input / Output dialog box Counter dialog box Status dialog box Enter the 6-digit chain-link (code) number for the component. Press the Start button on the UI to energize the output component or to read the status of the input component. Select Cyclic Motion for the component to repeat the operation. Input/Output column (component type), Status column (Operation status), and Counter column (Operation Count) are displayed on the Component Control screen. Press the Stop button on the UI to halt the component operation. Select Close to exit from Component Control. Поверяется отдельно черный ТРИ "кода" и вместе CMY ТРИ "кода" Последний раз редактировалось Vadim; 19.01.2023 в 13:54.. |
|
"Форум индустрии цифровой печати" 2008-2023 Все вопросы по сотрудничеству: Электропочта: info@trade-print.ru Москва, Печатников пер. |