Цитата:
Сообщение от Роман Сорокин
123-314 UI Panel Communication Fault
Switch the power off. Set the DIP Switch of Bit 2 (upper) on the
CP Control PWB (PL8.6) to off. switch the power on to boo the
Flash ROM.
• If the system boots correctly, reinstall the firmware. If the
problem still exists, replace the hard drive (PL 8.6)
• If the system does not boot correctly, replace the CP Control
PWB (PL8.6).
Вот описание ошибки. Разберетесь?
|
Добрый день, не можем найти ДИП