Цитата:
Сообщение от Yury_classic
dekrey, 5100 Chager current error
When the current value measured
at the time of potential
adjustment is less than 20 μA.
When the current values in
the chager voltage 500V constitute
not less than 85% of
target current values.
Defective connector
cable or poor
contact in the connector.
Reinsert the connector. Also check for continuity
within the connector cable. If none,
replace the cable.
Chager unit and high voltage PWB
High voltage PWB and engine PWB (YC16)
Defective high
voltage PWB.
Replace the high voltage PWB and check
for correct operation (see page 1-5-26).
Defective engine
PWB.
Replace the engine PWB and check for correct
operation (see page 1-5-22).
|
Вставил другую проявку от 2100 появилась ошибка 7410:0067272
проверял провода от проявки все звонятся)